Faxback NET SatisFAXtion 9.0 - Fax Server Manual Manual de usuario descargar pdf (Pagina 186)

RTPLogeachsentorreceivedaudiopacket.

CALL_PROGRESS Log periodic audio state during the RTP portion of the call (preT.38            

reinvite).



debug_show_tcp_url[string]:Connecttothishost:porttologdebuginformation.



debug_show_output [string]: Debug output that displays various run time behavior of          

ICANFax. When specifying the FAX_DEVICE, the ICANFax debug output will be mixed in with             

the fax drivers debug output. This is a device specific setting, but you can set the default for all                  

devices by specifying this under the global section. Format: One of the following values.             

Default:NONE.



NONE

CONSOLE

FILE

FAX_DEVICE

SERIAL_CAPTURE

TCP

dial_prefix[string(20)]:Datatobeprependedtodialstrings,typically9,ifpresent.



dial_wait [dword 0–255]: Seconds the driver to wait in the "ringing" state before hanging up.              

Default:45.



end_port_number [dword 1–65535]: Last UDP port to allocate for RTP and T.38. Default:            

49151.



firewall_name [string]: The base name for any Windows Firewall exceptions created by the            

IP_FAXdriver.Default:IP_FAX.



io_buffer_size [dword 0–65535]: This is the size of the image buffer. The necessary buffer             

size depends on host CPU speed and load as well as connect speed. This buffer directly adds to                 

driver page locked memory use so should be as small as possible. However, too small a buffer                

willcausefaxestofail.Default:20480.



local_ip_address [string]: Public IP address of NAT, for use with STUN. Specifically, this will             

overridethedomainpartoftheContact:header.OnlyanIPaddressisvalidhere,notaname.



phone_number [string]: Specifies a value that the IP fax driver sets in the From: header of               

SIP messages that it creates, identifying the IP fax port. A VoIP router can, if so configured, pass                 

alongthisvalueasthecallerID(ANI)fortheoutboundfaxcall.



post_page_holdup [boolean]: For nonECM fax receive, this causes the driver to wait until the             

app reading image data acknowledges quality of the page. This allows the driver to respond with               

MCF, RTP or RTN. Disabling this will allow for the drivers receive page buffering for latent apps.                

SeealsoICANFAX\rtp_percent,ICANFAX\rtn_percent.Default:true.



rings_before_answer[dword0–255]:Numberofringsbeforemodemacceptscall.

Default:1.



sdp_session_name [string]: Name to use for the s= session name attribute in the SDP.             

Default:SIPFaxCall.



show_console_scroll_back_buffer_size [dword 0–4294967295]: When the debug output      

isCONSOLE,thisishowbigofabuffertobeusedforscrollback.Default:282144.

ProprietaryFaxBack,Inc.2014 186

1 2 ... 181 182 183 184 185 186 187 188 189 190 191 ... 202 203

Comentarios a estos manuales

Sin comentarios

Faxback NET SatisFAXtion 9.0 - Fax Server Manual Manual de usuario Pagina 186

Comentarios a estos manuales

Relacionado con productos y manuales para Software Faxback NET SatisFAXtion 9.0 - Fax Server Manual