Faxback NET SatisFAXtion 9.0 - Fax Server Manual Manual de usuario descargar pdf (Pagina 22)

AudioCodesMediaPackMP114orMP118Gateway

Run ReDetect Fax Devices from the Start menu. Select the AudioCodes VoIP Gateways option             

to automatically configure the MediaPack gateway. Please refer to NET SatisFAXtion MediaPack           

Installonlineatfaxback.com/docs.



AudioCodesorCiscoMediaGatewayOnLocalSubnet

Run ReDetect Fax Devices from the Start menu. Select the AudioCodes VoIP Gateways option if              

you will be connecting to an AudioCodes media gateway or under Alternate Fax Devices select IP               

Fax(T.38)VoIPGatewaysforaCiscomediagateway.



By default, ReDetect Fax Devices will attempt to locate the media gateway on the local subnet               

via Simple Network Management Protocol (SNMP) broadcast and Cisco Discovery Protocol (CDP).           

This technique is sufficient to find AudioCodes and Cisco media gateways on the local subnet.              

NotethatitwillalsodetectotherCisconetworkdevicesthatmaynotbeVoIPmediagateways.



OtherMediaGatewayorGatewayNotOnLocalSubnet

If your media gateway is not on the local subnet or it is not a AudioCodes or a Cisco device, click                    

on the Show Advanced Settings link to enable manual configuration. For gateways that do not              

requireproxyauthenticationorregistration,simplyentertheIPaddressofthemediagateway.



If you require proxy authentication and registration, choose the radio option through this SIP             

proxy/server. Enter the remote IP address of the SIP device and fill in the required username               

and password. Usually AoR will be the same as the user name. It will be used in the SIP                  



If you only require proxy authentication but not registration, uncheck the SIP registrar logon             

same as SIP proxy/server checkbox and clear all values from Registrar, User name, Password             

andAoR.



Please note that the media gateway must support SIP and T.38 protocols, and must initiate              

T.38 on detection of fax tone for outbound faxes (for inbound faxes, NET SatisFAXtion will              

initiateT.38).



SIPTrunkProvider

If you are using a SIP provider, click on the Show Advanced Settings link to enable manual                

configuration. For providers that do not require authentication or registration (i.e. they use IP             

authentication),simplyentertheIPaddressspecifiedbytheprovider.



If you require authentication and registration, choose the radio option through this ⇨ SIP             

proxy/server. Enter the remote IP address specified by the provider and fill in the required              

username and password. Usually AoR will be the same as the username. It will be used in the                 

SIPREGISTERmessagesasthepartoftheFromURIbeforethe@.



Please note that the provider must support SIP and T.38 protocols, and must initiate T.38 on               

detectionoffaxtoneforoutboundfaxes(forinboundfaxes,NETSatisFAXtionwillinitiateT.38).



2.2.2.3UsingMultipleVoIPGateways

NET SatisFAXtion will answer all calls sent to it, so there is no additional configuration necessary to                

receivecallsfrommultiplegateways.



Tousemultiplegatewaystosendcalls,someadditionalregistryconfigurationisrequired.



2.2.2.4FaxServerwithMultipleNetworkInterfaceCards

A fax server with multiple network interface cards (NICs) presents a special problem. All SIP              

communication will use the IP address of the first adapter in the binding order. To check the binding                 

order, open the Control Panel ⇨ Network Connections folder. Click the Advanced ⇨ Advanced Settings              

menu. All the network connections on the server will be listed here. Move the connection that that                

shouldbeusedtothetopofthelist.



Alternately, you can manually override the IP address used by going to the ‘Change Server Settings’               

utility, Start ⇨ Programs ⇨ NET SatisFAXtion ⇨ Change Server Settings. Click the ‘Fax Hardware’              

button,selectaport,clickAdvanced,thenMoreSettings.



Make sure the IP address you enter is valid for this server. If using a domain name, make sure the                   

nameresolvesfromthemediagatewayandtheIPitresolvestoisvalidforthisserver.



ProprietaryFaxBack,Inc.2014 22

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 202 203

Comentarios a estos manuales

Sin comentarios

Faxback NET SatisFAXtion 9.0 - Fax Server Manual Manual de usuario Pagina 22

Comentarios a estos manuales

Relacionado con productos y manuales para Software Faxback NET SatisFAXtion 9.0 - Fax Server Manual