Faxback NET SatisFAXtion 9.0 - Fax Server Manual Manual de usuario Pagina 46

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 203
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 45
To strip digits from the end (right) of a number, configure the number of DTMF digits collected to
belessthanthefulldigitstringbeingsentfromthePBX.
2.5.1.4CSIDRouting
Pronetofailure.
Disabledbydefault.Toenable:
[HKLM\Software\FaxBack\CasDrive]
"RouteOnCsid"="1"
2.5.1.5CallerID/ANIRouting
Pronetofailure.
Disabledbydefault.Toenable:
[HKLM\Software\FaxBack\CasDrive]
"RouteOnAniCallerId"="1"
2.5.1.6T.30SubaddressRouting
The T.30 fax specification allows an additional identifier to be specified by the sender for routing
purposes. This feature was never widely implemented when it was first introduced, and is almost never
implementedtoday.
Disabledbydefault.Toenable:
[HKLM\Software\FaxBack\CasDrive]
"RouteOnT30SubAddress"="1"
"SubAddressSeparator"="#"
Subaddress is transmitted via a T.30 HDLC SUB frame, 20 characters in length. The allowed chars for
SUBarenumbers,space,*,and#”.
2.5.1.7InboundRoutingCapabilitiesByDevice
AudioCodesMediaPack,Mediant,andTrunkPack
AudioCodesMediaPacks(FXOports)arecapableofroutingonLineorDTMF.
AudioCodesMediaPacks(FXSports)areDIDTrunkcapable,andcanrouteonDNIS.
AudioCodes TrunkPack (TP260) cards, Mediant 1000s with T1/PRI cards, Mediant 2000 and
3000gatewaysarecapableofroutingonDNIS.Noadditionalconfigurationisnecessary.
EmulatingLineRouting:
The standard configuration NET SatisFAXtion applies enables line routing through the use of virtual
phone numbers. The DID number NET SatisFAXtion receives will indicate on which port the
MediaPack or Mediant received the fax. To use these line phone numbers, follow the instructions for
DIDroutingabove,andusetheportphonenumbersgivenbelow.
ThephonenumbersonAudioCodesMediaPackMP114andMP118sdefaulttothefollowing:
Port1:1000
Port2:1001
Port3:1002
Port4:1003
Port5:1004
Port6:1005
Port7:1006
Port8:1007
The phone numbers typically configured on a Mediant 1000 are slightly different. Note that Mediant
1000s often have customized configuration and so the following does not necessarily reflect your
Mediant’sconfiguration.
Module1Port1:1000
Module1Port2:1001
Module1Port3:1002
Module1Port4:1003
Module2Port1:2000
Module2Port2:2001
Module2Port3:2002
Module2Port4:2003
Module3Port1:3001
etc...
ProprietaryFaxBack,Inc.2014 46
Vista de pagina 45
1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 202 203

Comentarios a estos manuales

Sin comentarios